This service repair workshop manual PDF download has been prepared as an aid to improve the quality of repairs by giving the serviceman an accurate understanding of the Komatsu 114E-2 Series Diesel Engine and by showing him the correct way to perform repairs and make judgements. Make sure you understand the contents of this manual and use it to full effect at every opportunity.
APPLICABLE MODELS :
Engine model : SAA6D114E-2
Applicable machine :
Komatsu PC300-7 Hydraulic Excavator
Komatsu WA380-5 Wheel Loader
Komatsu GD655-3A,3C Motor Grader
Komatsu GD675-3A,3C Motor Grader
Komatsu CD110R-2 Crawler Carrier
TABLE OF CONTENTS :
- GENERAL
- STRUCTURE AND FUNCTION
- MAINTENANCE STANDARD
- TESTING AND ADJUSTING
- DISASSEMBLY AND ASSEMBLY
- REPAIR AND REPLACEMENT OF PARTS
MANUAL SPECIFICATION :
File Format : PDF
Language : English
Printable : Yes
Searchable : Yes
Bookmarked : Yes
Product Code : SEBM024603
Total Pages : 433
This shop manual mainly contains the necessary technical information for operations performed in a service workshop. For ease of understanding, the manual is divided into the following chapters; these chapters are further divided into the each main group of components.
STRUCTURE AND FUNCTION
This section explains the structure and function of each component. It serves not only to give an understanding of the structure, but also serves as reference material for troubleshooting. In addition, this section may contain hydraulic circuit diagrams, electric circuit diagrams, and maintenance standards.
TESTING AND ADJUSTING
This section explains checks to be made before and after performing repairs, as well as adjustments to be made at completion of the checks and repairs.
Troubleshooting charts correlating "Problems" with "Causes" are also included in this section.
DISASSEMBLY AND ASSEMBLY
This section explains the procedures for removing, installing, disassembling and assembling each component, as well as precautions for them.
MAINTENANCE STANDARD
This section gives the judgment standards for inspection of disassembled parts.
The contents of this section may be described in STRUCTURE AND FUNCTION.
OTHERS
This section mainly gives hydraulic circuit diagrams and electric circuit diagrams.
In addition, this section may give the specifications of attachments and options together.
This (OEM) Komatsu Shop Manual has detailed illustrations as well as step by step instructions, It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic. With step by step instruction & highly detailed exploded pictures & diagrams to show you how to complete the required job correctly & efficiently Using. Provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
This manual has been prepared as an aid to improve the quality of repairs by giving the serviceman an accurate understanding of the product and by showing him the correct way to perform repairs and make judgements. Make sure you understand the contents of this manual and use it to full effect at every opportunity. This is a must for the Do-It-Yourselfer! Saving Yourself $$$$$$ In Service Repair And Maintenance Costs !!!!
This manual PDF download contains specs, diagrams, actual real photo illustrations, and schemes. In addition to space savings, nice thing about having completly searcheble PDF files instead of a hard-printed manual is that you can use the Search feature in your PDF reader software (Adobe Acrobat) to find just what your looking for and just print out the exact pages you need or all manual easily. This is the same Repair Service manual your local dealer will use when doing a repair.
Instant Download means there is NO shipping costs or waiting for a CD or paper manual to arrive in the mail! You will receive this manual TODAY via Instant Download on completion of payment via our secure payment processor. We accept ALL major credit/debit cards/paypal.
Related Searches :
Komatsu 114E-2 Series Diesel Engine Service Manual PDF Download
Komatsu 114E-2 Series Diesel Engine Repair Manuals PDF Download
Komatsu 114E-2 Series Diesel Engine Workshop Manual PDF Download
Komatsu 114E-2 Series Diesel Engine Shop Manual PDF Download
Komatsu 114E-2 Series Diesel Engine Factory Service Manual PDF Download
Komatsu 114E-2 Series Diesel Engine Dozer FSM PDF Download
Komatsu 114E-2 Series Diesel Engine Dozer OEM Manual PDF Download
-
COVER
CONTENTS
SAFETY
SAFETY NOTICE
FOREWORD
GENERAL
HOW TO READ THE SHOP MANUAL
HOISTING INSTRUCTIONS
METHOD OF DISASSEMBLING, CONNECTING PUSH-PULL TYPE COUPLER
COATING MATERIALS
STRANDARD TIGHTENING TORQUE
ELECTRIC WIRE CODE
CONVERSION TABLE
UNITS
CAPSCREW MARKINGS AND TORQUE VALUES
CAPSCREW MARKINGS AND TORQUE VALUES - METRIC
CAPSCREW MARKINGS AND TORQUE VALUES - U.S. CUSTOMARY
PIPE PLUG TORQUE VALUES
SYMBOLS
ILLUSTRATIONS
01 GENERAL
APPLICABLE MACHINE
SPECIFICATION
OVERALL DRAWING
WEIGHT TABLE
ENGINE PERFORMANCE CURVE
11 STRUCTURE AND FUNCTION
AIR INTAKE DEVICE
EXHAUST MANIFOLD
AIR CLEANER
TURBOCHARGER
AFTERCOOLER
CYLINDER HEAD
CYLINDER BLOCK
CYLINDER LINER
MAIN CIRCULATION PART
CRANK SHAFT
PISTON-PISTION RING-PISTION PIN
CONNECTING ROD
VIBRATION DAMPER
TIMING GEAR PORTION
FRONT GEAR COVER
CAMSHAFT TIMING PIN
TIMING GEAR
CAM SHAFT
VALVE MECHANISM
VALVE, VALVE GUIDE
ROCKER-ARM SHAFT-PUSH ROD-TAPPET
OIL PAN
FLYWHEEL, FLYWHEEL HOUSING
LUBRICATION SYSTEM DIAGRAM
OIL PUMP
OIL FILTER, OIL COOLER
REGULTOR VLAVE, SAFETY VALVE
FUEL SYSTEM DIAGRAM
FUEL INJECTION PUMP
TIMING LOCK PIN OF FUEL INJECTION PUMP
FUEL FILTER
FUEL INJECTION NOZZLE
FUEL CUT SOLENOIS
COOLING SYSTEM DIAGRAM
WATER PUMP DRIVE
WATER PUMP (WITH ONE-PIECE, BEARING, SHAFT, ONE-PIECE WATER SEAL)
THERMOSTAT
FAN DRIVE
ALTERNATOR
STARTING MOTOR
STARTING AID
12 TESTING AND ADJUSTING
SPECIAL TOOL LIST
SPECIAL TOOLS FOR INTAKE AND EXHAUST SYSTEM
SPECIAL TOOLS FOR CYLINDER HEAD SYSTEM
SPECIAL TOOLS FOR ENGINE
SPECIAL TOOLS FOR FUEL SYSTEM
SPECIAL TOOLS FOR ACCESSORY COMPONENT SYSTEM
SPECIAL TOOLS FOR ELECTRICAL COMPONENT
SPECIAL TOOLS FOR ENGINE PERFORMANCE TEST
INTAKE AND EXHAUST SYSTEM
TROUBLESHOOTING DEFECTIVE ACTUATION OF INTAKE AND EXHAUST SYSTEM
MEASURING PLAY OF TURBOCHARGER ROTOR IN AXILA AND RADIAL DIRECTION
TESTING TURBOCHARGER WESTGATE VALVE
TESTING TURBOCHARGER WESTGATE CAPSULE
TESTING ACTUATION OF TURBOCHARGER WESTGATE
REPLACING TURBOCHARGER WESTGATE ACTUATOR BOOST CAPSULE
ADJUSTING TURBOCHARGER WESTGATE ACTUATOR
MEASURING EXHAUST RESISTANCE
REPLACING TURBOCHARGER
ENGINE
TROUBLESHOOTING DEFECTIVE ACTUATION OF ENGINE
VALVE MECHANISM AND CYLINDER HEAD
TESTING AIR SYSTEM AND FUEL SYSTEM
TESTING VALVE CLEARANCE
TESTING COMPRESSION
PISTION RING SEALING PERFORMANCE
VALVE SEALING PERFORMANCE
HEAD GASKET SEALING PERFORMANCE
VALVE SEAL WEAR
PROTRUDING PORTION OF FUEL INJECTION NOZZLE
FRONT GEAR HOUSING AND GEAR TRAIN
ROCKER LEVER, VALVE STEM, PUSH ROD, TAPPET, AND CAMSHAFT
PISTION AND CONNECTING ROD
CRANKSHAFT AND MAIN BEARING
CYLINDER BLOCK
FLYWHEEL HOUSING AND FLYWHEEL
ADJUSTING VALVE CLEARANCE
ADJUSTING 6-CYLINDER ENGINE
LUBRICATING SYSTEM
TROUBLESHOOTING DEFECTIVE ACTUATION OF LUBRICATING SYSTEM
HIGH PRESSURE
REGULATOR VALVE
LOW PRESSURE
OIL LEVEL
OIL FILTER
OIL PRESSURE GAUGE
OIL PAN SUCTION TUBE
BEARING AND OIL PUMP
DILUTION OF OIL
COOLING WATER IN OIL
FUEL IN OIL
FUEL
FUEL INJECTION PUMP CALIBRATION DATA
RUNNING IN STANDARD
PERFORMANCE TEST CRITERIA
TESTING FUEL FEED PUMP
DISASSEMBLY AND ASSEMBLY OF FUEL FEED PUMP
ADJUSTING FUEL CUT-OFF SOLENOID
DIRECTION OF FUEL CUT-OFF SOLENOID
ADJUSTING FUEL CUT-OFF SOLENOID
INSTALLATION OF MECHANICALLY OPERATED SOLENOID, CYLINDER BLOCK
TESTING FOR AIR INSIDE THE FUEL SYSTEM
TESTING WATER SEPARATOR, FUEL FILTER
TESTING HIGH-PRESSURE FUEL PIPING
TESTING FUEL INJECTION NOZZLE
TESTING FUEL DRAIN PIPING
BLEEDING AIR FROM FUEL SYSTEM
BLEEDING AIR FROM LOW-PRESSURE CIRCUIT AND FUEL FILTER
BLEEDING AIR FROM FUEL INJECTION PUMP
BLEEDING AIR FROM HIGH-PRESSURE CIRCUIT
ADJUSTING TIMING OF FUEL INJECTION PUMP
COOLING SYSTEM
TROUBLESHOOTING DEFECTIVE OPERATION OF COOLING SYSTEM
RADIATOR CAP
WATER PUMP
RADIATOR, FAN, AND RADIATOR SHUTTER
THERMOSTAT
WATER TEMPERATURE GAUGE, EXCESSIVE FUEL, OVERLOAD
STANDARD VALUE TABLE FOR TESTING, ADJUSTING, AND TROUBLESHOOTING
TROUBLESHOOTING OF ENGINE (S MODE)
METHOD OF USING TROUBLESHOOTING CHARTS
S-1 STARTING PERFORMANCE IS POOR (STARTING ALWAYS TAKES TIME)
S-2 ENGINE DOES NOT START
(1) ENGINE DOES NOT TURN
(2) ENGINE TURNS BUTNO EXHAUST SMOKE COMES OUT (FUEL IS NOT BEING INJECTED)
(3) EXHAUST SMOKE COMES OUT BUT ENGINGE DOES NOT START (FUEL IS BEING INJECTED)
S-3 ENGINE DOES NOT PICK UP SMOOTHLY (FOLLOW-UP IS POOR)
S-4 ENGINE STOPS DURING OPERATIONS
S-5 ENGINE DOES NOT ROTATE SMOOTHLY (HUNTING)
S-6 ENGINE LACKS OUTPUT(OR LACKS POWER)
S-7 EXHAUST SMOKE IS BLACK (INCOMPLETE COMBUSTION)
S-8 OIL CONSUMPTION IS EXCESSIVE (OR EXHAUST SMOKE IS BLUE)
S-9 OIL BECOMES CONTAMINATED QUICKLY
S-10 FUEL CONSUMPTION IS EXCESSIVE
S-11 OIL IS IN COOLIN WATER, OR WATER SPURTS BACK, OR WATER LEVEL GOES DOWN
S-12 OIL PRESSURE CAUTION LAMP LIGHT UP (DROP IN OIL PRESSURE)
S-13 OIL LEVEL RISES (WATER, FUEL IN OIL)
S-14 WATER TEMPERATURE BECOMES TOO HIGH (OVERHEATING)
S-15 ABNORMAL NOISE IS MADE
S-16 VIBRATION IS EXCESSIVE
13 DISASSEMBLY AND ASSEMBLY
SPECIAL TOOL LIST
SPECIAL TOOLS FOR DISASSEMBLY AND ASSEMBLY
OUTLINE OF DISASSEMBLY AND ASSEMBLY OF ENGINE
OUTLINE
OVERALL DISASSEMBLY OF ENGINE
ENGINE LIFTING TOOL AND BRACKET
PREPARATION FOR STEAM CLEANING OF ENGINE
STEAM CLEANING OF ENGINE
DRAINING OIL
DRAINING COOLANT
REMOVAL OF OIL FILTER
REMOVAL OF FUEL FILTER
REMOVAL OF FUEL SUPPLY PIPE (LOW-PRESSURE SIDE)
REMOVAL OF FUEL FEED PUMP
REMOVAL OF FUEL SUPPLY PIPE (HIGH-PRESSURE SIDE)
REMOVAL OF FUEL INJECTION PUMP FUEL SUPPLY PIPES
REMOVAL OF BOOST COMPENSATOR TUBE
REMOVAL OF TACHOMETER DRIVE
REMOVAL OF FUEL INJECTION PUMP
REMOVAL OF AIR CONDITIONER COMPRESSOR
INSTALLATION OF ENGINE TO ENGINE STAND
REMOVAL OF TURBOCHARGER EXHAUST OUTLET CONNECOR
REMOVAL OF WESTGATE ACTUATOR HOSE
REMOVAL OF CYLINDER BLOCK BREATHER TUBE
REMOVAL OF CROSSOVER TUBE
REMOVAL OF INTAKE MANIFOLD COVER
REMOVAL OF AFTERCOOLER
REMOVAL OF FUEL DRAIN MANIFOLD
REMOVAL OF INJECTOR
REMOVAL OF CYLINDER HEAD COVER
REMOVAL OF ROCKER LEVER
REMOVAL OF PUSH ROD
REMOVAL OF TURBOCHARGER OIL SUPPLY HOSE
REMOVAL OF TURBOCHARGER OIL DRAIN TUBE
REMOVAL OF TURBOCHARGER
REMOVAL OF EXHAUST MANIFOLD
REMOVAL OF DRIVE BELT
REMOVAL OF BELT TENSIONER
REMOVAL OF BELT TENSIONER BRACKET
REMOVAL OF ALTERNATOR BRACKET
REMOVAL OF ALTERNATOR
REMOVAL OF ALTERNATOR BRACKET
REMOVAL OF COOLANT OUTLET CONNECTOR
REMOVAL OF COOLANT AIR BLEED TUBE
REMOVAL OF COOLANT AIR BLEED VALVE
REMOVAL OF THERMOSTAT AND HOUSING
REMOVAL OF THERMODSTATE AND HOUSING
REMOVAL OF CYLINDER HEAD
DRAINING OIL FROM OIL COOLER
REMOVAL OF COOLANT INLET CONNECTOR
REMOVAL OF FAN HUB ASSEMBLY
REMOVAL OF WATER PUMP
REMOVAL OF VIBRATION DAMPER
REMOVAL OF GEAR COVER
REMOVAL OF FRONT CRANKSHAFT SEAL
REMOVAL OF STARTING MOTOR
REMOVAL OF COOLANT HEATER
REMOVAL OF FLYWHEEL
REMOVAL OF FLYWHEEL HOUSING
REMOVAL OF OIL PAN
REMOVAL OF SUCTION TUBE
REMOVAL OF REAR CRANKSHAFT SEAL
REMOVAL OF CAMSHAFT
REMOVAL OF VALVE TAPPET
MEASUREMENT OF OIL PUMP GEAR BACKLASH
REMOVAL OF OIL PUMP
REMVOAL OF ENGINE FRONT SUPPORT
REMOVAL OF GEAR HOUSING
REMOVAL OF CARBON ACCUMULATED ON CYLINDER LINER
REMOVAL OF PISTON ASSEMBLY
REMOVAL OF PISTON PIN
REMOVAL OF PISTION RING
REMOVAL OF MAIN BEARING CAP
REMOVAL OF MAIN BEARING (LOWER)
REMOVAL OF CRANKSHAFT
REMOVAL OF MAIN BEARING (UPPER)
REMOVAL OF PISTION COOLING NOZZLE
TESTING PROTRUSION OF CYLINDER LINER
REMOVAL OF CYLINDER LINER
REPLACEMENT OF EXPANSION PLUG
REMOVAL OF EXPANSION PLUG
REMOVAL OF CYLINDER BLOCK FROM ENGINE STAND
ASSEMBLY OF ENGINE
INSTALL THE CYLINDER BLOCK TO THE ROLL-OVER STAND
INSTALLATION OF CYLINDER LINER
INSTALLATION OF TAPPET
INSTALLATION OF PISTION COOLING NOZZLE
INSTALLATION OF MAIN BEARING (UPPER)
INSTALLATION OF CRANKSHAFT
INSTALLATION OF MAIN BEARING (LOWER)
INSTALLATION OF MAIN BEARING CAP
INSTALLATION OF CONNECTING ROD BOLT
INSTALLATION OF PISTION PIN
MEASURING PISTON RING END GAP
INSTALLATION OF PISTION RING
INSTALLATION OF PISTON ASSEMBLY
INSTALLATION OF GEAR HOUSING
INSTALLATION OF OIL PUMP
INSTALLATION OF CAMSHAFT
INSTALLATION OF WATER PUMP
INSTALLATION OF OIL SUCTION TUBE
INSTALLATION OF REAR CRANKSHAFT SEAL
INSTALLATION OF WEAR SLEEVE, REAR CRANKSHAFT SEAL
INSTALLATION OF OIL PAN
INSTALLATION OF TIMING PIN ASSEMBLY
INSTALLATION OF FLYWHEEL HOUSING
TESTING COAXIALITY OF FLYWHEEL HOUSING BORE
INSTALLATION OF FLYWHEEL
MEASURING RUNOUT OF FLYWHEEL BORE
MEASURING FACE RUNOUT OF FLYWHEEL
INSTALLATION OF STARTING MOTOR
INSTALLATION OF OIL COOLER
INSTALLATION OF OIL FILTER
INSTALLATION OF CYLINDER HEAD
INSTALLATION OF PUSH ROD
ASSEMBLY OF ROCKER LEVER AND SHAFT
INSTALLATION OF ROCKER LEVER ASSEMBLY
ADJUSTING VALVE CLEARANCE
INSTALLATION OF HEAD COVER
INSTALLATION OF CYLINDER BLOCK BREATHER TUBE
INSTALLATION OF INJECTOR
INSTALLATION OF FUEL DRAIN MANIFOLD
INSTALLATION OF ENGINE LIFTING BRACKET
INSTALLATION OF INTAKE MANIFOLD COVER
INSTALLATION OF AFTERCOOLER
INSTALLATION OF EXHAUST MANIFOLD
INTALLATION OF TURBOCHARGER
INSTALLATION OF TURBOCHARGER OIL DRAIN TUBE
INSTALLATION OF TURBOCHARGER OIL SUPPLY HOSE
INSTALLATION OF TURBOCHARGER EXHAUST OUTLET PORT CONNECTOR
INSTALLATION OF CROSSOVER
INSTALLATION OF THERMOSTAT AND HOUSING
INSTALLATION OF COOLANT OUTLET CONNECTOR
INSTALLATION OF COOLANT AIR BLEED JOINT
INSTALLATION OF COOLANT AIR BLEED VALVE
INSTALLATION OF COOLANT AIR BLEED TUBE
INSTALLATION OF COOLANT INLET CONNECTOR
INSTALLATION OF ALTERNATOR BRACKET
INSTALLATION OF ALTERNATOR
INSTALLATION OF ALTERNATOR BRACE
INSTALLATION OF BELT TENSIONER BRACKET
INSTALATION OF BELT TENSIONER
REMOVAL OF ENGINE ASSEMBLY STAND
INSTALLATION OF FAN HUB ASSEMBLY
INSTALLATION OF FUEL INJECTION PUMP
INSTALLATION OF FUEL INJECTION PUMP, FUEL SUPPLY LINE
INSTALLATION OF FUEL FILTER HEAD
INSTALLATION OF FUEL FILTER
INSTALLATION OF FUEL INJECTION PIPE (HIGH-PRESSURE SIDE)
INSTALLATION OF BOOST COMPENSATOR TUBE
INSTALLATION OF FRONT CRANKSHAFT SEAL
INSTALLATION OF FRONT CRANKSHAFT WEARSLEEVE
INSTALLATION OF GEAR COVER
INSTALLATION OF TACHOMETER DRIVE
INSTALLATION OF CRANKSHAFT PULLEY, VIBRATION DAMPER
INSTALLATION OF BELT
INSTALLATION OF ENGINE FRONT SUPPORT
INSTALLATION OF FUEL FEED PUMP
INSTALLATION OF FUEL PIPING TUBE (LOW PRESSURE SIDE)
INSTALLATION OF FUEL PUMP SOLENOID
INSTALLATION OF AIR COMPRESSOR
INSTALLATION OF ENGINE ACCESSORY
15 REPAIR AND REPLACEMENT OF PARTS
OUTLINE
REPAIR GUIDE LINE
WHEN SHOULD SUBSTITUTE REPAIRS BE CARRIED OUT
INSPECTION
TO ENSURE SAFETY, FOLLW ALL INSTRUCTION IN MANUAL
FOLLOW WASHING METHODS GIVEN IN MANUAL
FOLLOW INSPECTION METHODS GIVEN IN MANUAL
REPAIR METHODS FOR SCREWS USING COIL THREAD INSERT
METHODS FOR USING TAPER THREAD PLUGS TO SEAL POCKETS AND SMALL HOLES IN CASTINGS
REPAIR PROCEDURE
METHODS FOR REPAIRING TAPER THREAD PLUG HOLES WORE BY LARGE SIZER COPPER PLATED PLUGS
METHOD OF USING FILLER METAL IN EMERGENCY REPAIRS
INSPECTION FOR REUSE OF CYLINDER BLOCK
INSTALLATION OF EXPANSION PLUGS
INSTALLATION OF PIPE PLUGS
INSTALLATION OF EXPANSION PLUG TO CAMSHAFT HOLE
REMOVAL OF CAMSHAFT BUSHING
CLEANING OF CAMSHAFT BUSHING HOLE
INSTALLATION OF CAMSHAFT BUSHING
CLEANING AND INSPECTING OF CYLINDER LINERS BEFORE REUSING THEM
CLEANING OF CYLINDER LINERS
INSPECTION OF CYLINDER LINERS
CLEANING AND INSPECTION OF PISTON BEFORE REUSING IT
REMOVE THE PISTON RINGS
CLEANING OF PISTONS
INSPECTION OF PISTONS
CLEANING AND INSPECTION OF CRANKSHAFT BEFORE REUSING IT
CLEANING OF CRANKSHAFT
INSPECTION OF CRANKSHAFT
REPLACEMENT OF CRANKSHAFT GEAR
REMOVAL OF CRANKSHAFT GEAR
INSPECTION OF CARNKSHAFT
INSTALLATION OF CRANKSHAFT GEAR
CLEANING AND INSPECTION OF MAIN BEARINGS BEFORE REUSING THEM
GENERAL INFORMATION
CLEANING OF MAIN BEARINGS
INSPECTION OF MAIN BEARINGS
INSPECTION OF THRUST BEARING
CLEANING AND INSPECTION OF MAIN BEARING CAPS AND MOUNTING BOLTS BEFORE REUSING THEM
CLEANING
INSPECTION
CLEANING AND INSPECTION OF CONNECTING ROD BEARINGS BEFORE REUSING THEM
CLEANING OF CONNECTING ROD BEARINGS
INSPECTION OF CONNECTING ROD BEARINGS
CLEANING AND INSPECTION OF CONNECTING RODS BEFORE REUSING THEM
CLEANING OF CONNECTING RODS
INSPECTION OF CONNECTING RODS
INSPECTION OF CONNECTING RODS FOR BEND AND TORSION
CALIBRATION OF FIXING TOOL
INSPECTION OF ALIGNMENT OF CONNECTING RODS
REPAIR PROCEDURE FOR CONNECTING RODS
REPLACEMENT OF CONNECTING ROD BUSHINGS
REMOVAL
INSTALLATION
INSPECTION
REPLACEMENT OF VALVE INSERTS OF CYLINDER HEAD
REMOVAL
INSPECTION
ASSEMBLY
INSPECTION OF VALVE GUIDES
INSPECTION OF VALVE SEAT INSERTS
INSPECTION OF VALVE SPRINGS
INSPECTION OF VALVE STEM SEAL
INSPECTION OF VALVES
GRINDING OF VALVES
GRINDING OF VALVE SEAT INSERTS
ASSEMBLY
INSTALLATION OF PIPE PLUGS
REPLACEMENT OF VALVE GUIDES OF CYLINDER HEAD
DISASSEMBLY
INSPECTION
ASSEMBLY
CYLINDER HEAD-PRESSURE TEST
VACUUM TEST ON VALVE SEATS OF CYLINDER HEAD
CLEANING AND INSPECTION OF CYLINDER HEAD BOLTS
CLEANING
INSPECTION
FREE LENGTH-MEASUREMENT
-